TV Logic XVM-177A full HD 17“ Reference monitor


Display Spec.


 Size 16.5″
 Resolution 1920 X 1080 (16 : 9)
 Pixel Pitch 0.191mm
 Color Depth 1.07B
 Viewing Angle 178°(H) / 178°(V)
 Luminance 450cd/m2
 Contrast Ratio 1400:1
 Display Area 366(H) x 206(V) mm


 1 X BNC Analog Input (Composite)
 3 X BNC Analog Input (Component)
 2 X BNC 3G-SDI A/B Channel Input
 1 X HDMI HDMI Input
 1 X DVI DVI Input


 1 X BNC Analog Output (Composite)
 3 X BNC Analog Output (Component)
 2 X BNC 3G-SDI A/B Channel Output

Input Signal

 Analog CVBS / S-Video / Component Video / RGB(D-TV)
 3G SDI 2.970Gbps
 HD SDI 1.485Gbps
 SD SDI 270Mbps
 HDMI 480i/480p/576i/576p/720p/1080i/1080p/640×480/ 720×400/800×600/1024×768/1280×1024/1366×768
 DVI Analog 640×480/720×400/800×600/1024×768/1280×1024/ 1366×768
 DVI DP 640×480/720×400/800×600/1024×768/1280×1024/ 1366×768

SDI Input Signal Formats


 Audio In Embedded Audio/Analog Stereo (Phone Jack)
 Audio Out Analog Stereo (Phone Jack), Internal Speaker(Mono)

FPGA Functions

 1:1 Pixel Mapping Modes for SD/HD,  3G-SDI Level A/B,  Audio Level Meter Display,  Blue Only,  H/V Delay,  Key Lock,  Marker,  Mono,  Range Error,  Time Code Display,  UMD,  User Aspect,  Various Scan Modes,  Waveform/Vector,  X3 Zoom(PBP),  Picture by picture

Closed Caption

 CC-608 ANC,  CC-608 LINE 21,  CC-708,  OP42,  OP47


 TVLogic Color Calibration Utility, 3D LUT & Adjustable Gamma, 3rd Party 3D LUT Import, Uniformity Correction

Other Functions

 Reference Sync input  EXT_Sync in
 REMOTE  TVLogic’s specification
 USB  AUTO Calibration  Firmware update by USB memory stick
 Ethernet  Ethernet Control support


  Carrying Case,  Gold Mount,  Rack Mount Kit(Single),  Sun Hood,  V-Mount


Add to wishlist
Add to wishlist
Tv Logic


XVM-177A е ново допълнение от 1920 x 1080 към серията XVM. Проектиран за вградени и студийни приложения за критично наблюдение на цветовете, усъвършенстваният 12-битов механизъм за обработка на видео на TVLogic и прецизната технология за калибриране на цветовете се комбинират с най-новото поколение 1920×1080 IPS LCD панел за несравнимо качество на изображението

Характеристиките включват: Focus Assist, Markers / Mattes , Waveform / Vectorscope, показване на Timecode, UMD, затворен надпис, бърз режим, множество предварително зададени настройки на Colorspace с вътрешен 3D LUT, контрол на подсветката и гама, импортиране на 3D LUT от трета страна и др.

3G-SDI Level A/B

Supports 3G-SDI Level A/B input.

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.


Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

Custom 3D LUT Import

Allows you to load your making 3D-LUT files at NLE software like Davinci Resolve by USB flash memory and displays your LUT on VFM-055A or F-7H. Once you synchronize LUTs in the monitor, you will easily change them on production.


Closed caption

Closed caption.


Focus Assist

Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field.


H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen.


Key Lock

Key Lock is a password-protection function of the OSD menu so that non-authorized users cannot change the setting of the monitor.



Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.


PBP(Picture by Picture)

Support displaying multiple inputs on the screen at the same time.


Range Error

Analyzes the input signal’s Luma (Y’) and chroma (C’) information. If the input signal exceeds the designated minimum and maximum values, the pixel will blink. This function allows for the user to easily identify any issues with exposure.

Time Code Display

Displays the Timecode information on the screen.



Displays user customized 8 characters or source ID or Tally signal of Ancillary (ANC) data on the screen.

User Aspect

Adjusts the Width /Height display ratio.


Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.


Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.


Magnifies the input signal from 0% to 90%.



TV Logic

Tv Logic